Control Board For 1 RPM Auger Motor Stoves: (80684) (A-E-401) C-E-401

This is a replacement OEM control panel with 5-speed settings for select Breckwell pellet stoves that use a 1RPM auger motor. This part replaces many different part numbers due to the various revisions it has undergone, please be sure to check the information below. 

Tip: To see if your stove uses a 1RPM or 4RPM auger motor, check the spacing on your auger shaft. Auger shaft coils spaced 1" indicate a 4RPM motor, whereas 2" spacing indicates a 1RPM motor.

Replacement Breckwell 401 control board for Golden Eagle pellet stoves. Please check your owner's manual for compatibility.

Breckwell part # A-E-401GE
OEM USSC part

Model Specific Information (See Compatible Models Too):

• P22 - NOT COMPATIBLE (See the A-E-101)
• P23 - Serial # 7166 to Present
• P23I - Serial # 2243 to Present
• P24 - Serial # 53664 to Present
• P24I - Serial # 53795 to Present
• P1000 - All Units
• P2000 - Serial # 11780 to Present
• P2000I - Serial # 22208 to Present
• P2700 - Serial # 8445 to Present
• P4000 - NOT COMPATIBLE (See the A-E-101)

Note:

• Breckwell Control Board Fits Stove With 1 RPM Auger Motor, #(A-E-401)
• This is the same control panel as the C-E-400 and C-E-401. It is just a newer, updated version and is completely compatible.
• This control panel is used on most current model pellet stoves except the P22 and P4000 Classic Cast stove

Note: If you have a digital control panel and the serial number of your stove is smaller than those listed above you will need the C-E-301 control panel.

Note: If your current control board is the old-style analog board with dials and rocker switches you will need a kit with wiring harness: C-E-404

*Additional Information Serial numbers are approximate and should not be the only source of validation for the part. Serial numbers may be off by as much as 10 units either way.

• C-E-401
• A-E-401
• C-E-400
• 610326
• 80684